Tagged: ,

This topic contains 3 replies, has 2 voices, and was last updated by  Frank S. 4 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2634

    mc_ott
    Participant

    I need a steel tube and PTFE inserts, these are non standard parts, where can I find one? Costumer Support does not respond to my request. See Picture: https://scontent.fybz1-1.fna.fbcdn.net/v/t1.0-9/20708236_10209206684183520_6330571260610681433_n.jpg?oh=b9952d235e45b36d28420fd6dbbcfdec&oe=5A28C893

    #2636

    Frank S.
    Participant

    Hallo,
    leider bekommt man keinerlei Rückmeldungen, schade!
    Das PTFE Röhrchen bekommt man z.B. bei Ebay und zwar 2×3
    (Teflonschlauch hochwertig PTFE 2×3) – Innendurchmesser 2mm, Außendurchmesser 3mm.
    Ein Stahlrohr braucht man nicht neu, das kann man mit einen guten 3mm Bohrer wieder reinigen (aufbohren).
    Dann müsste es wieder gut funktionieren.
    Viele Grüße

    Hello,
    Unfortunately you get no feedback, too bad!
    The PTFE tube is obtained e.g. With Ebay and 2×3
    (Teflon hose high quality PTFE 2×3) – inside diameter 2mm, outside diameter 3mm.
    A steel pipe is not needed, you can clean it with a good 3mm drill (drill).
    Then it should work again.
    Best regards

    #2637

    mc_ott
    Participant

    Thanks for the info, I did order from ebay.

    #2638

    Frank S.
    Participant

    Hallo,
    wichtig ist es auch, das Stahlrohr wieder mit Thermischen Fett einzukleben:
    Viele Grüße

    Hello,
    It is also important to glue the steel tube back with thermal grease:
    Best regards

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.