full aluminium body
We designed the Pro with a minimalistic approach. Its appearance is stylish as well as functional.
We designed the Pro with a minimalistic approach. Its appearance is stylish as well as functional.The mostfun Pro has a full metal body which gives the printer a robust structure.
Additionally because it is made from aluminium, the printer weighs only 19 pounds.
smooth user experience
A good 3D printer should be reliable and easy to use. It should require no manual to go through to get on board and should perform consistently over time.
This is exactly what we have been aiming for.
Plug & Print
Creating a Plug & Print experience has always stood at the center of our developmental process. Therefore, we have removed the driver installation procedure for you.
cross platform & device
The user interface is based on HTML5/JS/CSS. You can access the control panel regardless of the paltform and device you are using.
Because the quality of the extruder contributes most to the printing quality, we have developed our own extruder from scratch.
Based on our test during the development, the mostfun Pro is able to maintain its original preecision level over a month with intensive daily printing. (10+hours everyday)
For mostfun you don’t need to worry about build plate levelling. We have an auto-levelling function integrated into the extruder. Before every printing starts the printer will automatically measure the slant angle of the tray and compensate it during the printing.
(Acrylonitrile butadiene styrene )
Mostfun Pro’s control system was developed based on the intel edison module. Through the cooperation with intel we have developed a series of convenient features which make the overall experience much more user-friendly.
AP connection: In AP mode the printer will generate its own hotspot.
WLAN share: The printer can also join a network as a shared device.
The notification system will remind you in different circumstances. For example, when the printing is complete or if the material is about to run out.
Pause & Resume
If you urgently need to print a model, but the printer is occupied by an other time-consuming model. With this function you could pause the printing and pull out the model. After you finished printing the urgent one, you could then put the model back and resume printing.
You could also pause the ongoing printing and change the filament of different color.
extruder nozzle diameter
SD card printing
Fused Deposition Modeling (FDM)/ desktop
33cm(L) x 33cm(W) x 38cm(H) *
22cm(L) x 18cm(W) x 16cm(H)*
8.8kg / 19 pounds*
100-240V 2.2 A
PLA，ABS，TPU，WAX, HIPS, Nylon