Selecting an External File to Print

  mostfun Pro supports two types of external storage, SD card and USB-disk for printing.   SD card and USB-disk SPEC SDHC Card Slot Supported SD card formats: FAT, FAT32, NTFS Supported Maximum SD card memory: 32G USB Slot Type: USB2.0 Output: 5V 0.5 A Support device: USB-disk Note: Only .gcode files are supported in…

Details

E-mail Notification

mostfun Pro supports taking pictures and e-mail notification. Below are the detailed procedures:   1.Log In Panel and Enter “Settings”- “E-mail Settings” For details, please refer to an introduction to the Panel: http://mostfun.cn/mostfun-panel/   2.STA Settings Connect Mostfun Pro to your WIFI. You can use a computer or mobile phone or other devices connected to…

AP/STA Mode

We have two ways to enter Mostfun Panel control page.   AP mode: mostfun Pro has built-in WIFI. You can connect to its hotspot to access directly and log in mostfun Panel. STA mode: Connect mostfun Pro to a nearby WIFI. Any device in the same hot spot can log in Mostfun Panel.   AP…

Introduction of mostfun Panel

  Overview mostfun Panel is a web control platform , developed by MOSTFUN, which allows user to log in a web interface to print, supervise and perform other operations on mostfun Pro..   Logging in mostfun Panel 1.Check the hotspot & IP of the mostfun Pro Operate Mostfun Pro control panel, “Connection information” – “AP…

Printable Document Production

  Achieve the print files There are three ways to get a model file: 1) designing with a 3D modeling software; 2) downloading from models sharing website; 3) scanning and building with a 3D scanner, which could generate .STL model files. Yet the .STL file could not be used for printing directly. You could use…

First Use of mostfun Pro

Boot 1.Connect the power supply and press the power switch; 2.When the LED of front panel flashes and the corresponding buzzer buzzes, Mostfun Pro has been booted correctly. Loading Materials 1.Choose the rotary switch and select “Refill & levelling” — “Refill & test”;   2.Now, the extruder will move to central platform from the initial position automatically and…

Unpacking Your mostfun Pro

mostfun Pro is one of the FDM desktop 3D printers.( FDM is the abbreviation for Fused Deposition Modeling. ) FDM 3D printers melt thermoplastic materials (PLA, ABS, TPU and other materials) and extrude them into semi-molten filaments using high temperature, and pile filaments layer upon layer into a 3D object. This technique is widely-used in…