Preserving Consumables

  It may absorb water and inflate PLA in the longtime exposure that may jam the extruder. The remaining water may boil to lead to uneven extrusion when heated. To avoid such problems, materials are recommended to preserve in a dry and closed environment, preferably with desiccant when leaving unused. Insert one end of consumables…

Details

Lubricating the Machine

  We suggest applying lubricating oil to the transmission structure of mostfun Pro once every 100 hours of printing. Lubricating oil/grease officially recommended by mostfun can be selected for mechanical maintenance. Lubricating linear X and Y-axis guides: Add grease to the left and right guides and the guide on the central beam. Add grease to…

Details

Gluing the Platform

  To glue a model firmly to the build plate, a glue stick is recommended to evenly daub the platform. Please be noted the following points while gluing: 1)Ensure the heated bed is in a cooling state before taking out a build plate. 2) Taking out the build plate from the machine and then glue.…

Details

Language Settings

mostfun Pro supports Chinese and English. To set a language of mostfun Pro, you need to enter Mostfun Panel first and then set in the operation interface of Panel.   To enter Mostfun Panel, please refer to http://mostfun.cn/mostfun-panel/   Find “Settings”- “Language” in the menu bar and select a required language type. Click “Save”.  …

Resume and Stop Printing

mostfun Pro enables users to pause, resume and stop printing.   Pause: In the printing process, press down the rotary switch, “Pause” will be shown on the screen. After selecting “Pause”, there will be a prompt “Yes” or “No”. If you want to pause the printing, choose “Yes”. The machine will pause the current printing…

Functions of the Heated Bed

  Functions of the Heated Bed For printing ABS and other materials, heated bed is an effective auxiliary feature. After heated, materials will be extruded onto a build plate. Due to shrinkage of materials, the first layer adhering to the plane can be easily warped up. After a heated bed is started, since the first…

Using Different Printing Consumables(PLA、TPU、ABS)

  Different consumables have different characteristics, but their printing procedures are roughly the same, except that curtain parameters must be adjusted when slicing with slicing software (e.g. C4M); In C4M, as long as a consumable type (PLA/ABS/TPU) is selected, corresponding settings will be changed automatically, without the need to set each parameter manually: (Note: After…

Auto Leveling

Due to shipment and other uncontrollable factors, the relative position between platform and nozzle may change after leaving the factory. So we suggest that you conduct a self-levelling when using Mostfun Pro 3D printer for the first time. Note: Before self-leveling, please make sure the build plate is clean without sundry, and is completely fixed…

Loading Materials

  1.Choose a rotary encoder and select “Reloading & levelling” — “Refill & test”;   2.Now, the extruder will move to central platform from the initial position automatically and begin to heat the extruder about 1-2 minutes (as shown in the picture). Wait until the nozzle temperature reaches 200℃ (the button becomes white and red).…