Auto leveling

Auto leveling   Due to shipment and other uncontrollable factors, the relative position between platform and nozzle may change after leaving the factory. So we suggest that you conduct a self-levelling when using Mostfun Pro 3D printer for the first time. Note: Before self-leveling, please make sure the build plate is clean without sundry, and…

Loading Materials

Loading Materials Choose a rotary encoder and select “Reloading & levelling” — “Refill & test”; Now, the extruder will move to central platform from the initial position automatically and begin to heat the extruder about 1-2 minutes (as shown in the picture). Wait until the nozzle temperature reaches 200℃ (the button becomes white and red).…

mostfun Pro user manual

Basic Unpacking Your Mostfun Pro First use mostfun Pro   Other Print document production mostfun-panel AP/STA mode Select an external file to print Loading Materials Auto leveling Using different printing consumables(PLA、TPU、ABS) Functions of the Heated Bed Resume and stop printing Language setting E-mail notification   maintenance mostfun Pro maintain   Troubleshooting Troubleshooting   Service and…

E-mail notification

Mostfun Pro supports taking pictures and e-mail notification. Below are the detailed procedures: Log in Panel and enter “Settings”- “E-mail settings” For details, please refer to an introduction to the Panel: http://mostfun.cn/mostfun-panel/ STA Settings Connect Mostfun Pro to your WIFI. You can use a computer or mobile phone or other devices connected to the same…

Service and support

To make customers rest assured and feel satisfied with our products, our company will strictly abide by the laws and regulations issued by the country and set up a reasonable after-sales service system.   Warranty The complete machine and power supply enjoy a 1-year warranty. The extruder, belt, printing platform and other quick-wear parts enjoy…

First use mostfun Pro

Boot Connect the power supply and press the power switch. When the LED of front panel flashes and the corresponding buzzer buzzes, Mostfun Pro has been booted correctly. Loading Materials Choose the rotary switch and select “Refill & levelling” — “Refill & test”; Now, the extruder will move to central platform from the initial position automatically and begin…

Resume and stop printing

Mostfun Pro enables users to pause, resume and stop printing.   Pause: In the printing process, press down the rotary switch, “Pause” will be shown on the screen. After selecting “Pause”, there will be a prompt “Yes” or “No”. If you want to pause the printing, choose “Yes”. The machine will pause the current printing…

Troubleshooting

Can’t load filament Make sure that the extruder has been heated to 200℃. Try to insert consumables and press down the rocker, to make consumables firmly held and could not easily pulled out. After that, operate the extruded consumables. Can’t remove filament Make sure that the extruder has been heated to 200℃. Try to extrude…